Home/ Industries We Serve/ Welding & Metal Processing
Industry FR fabric solutions

Welding & Metal Processing

Certified protection against splash, heat and flame

Welders and metal workers face molten metal splash, radiant heat from the arc, brief contact with flame, and a minor risk of electric shock from live conductors — the exact hazards EN ISO 11611 was written to test. XM FireLine fabrics are woven from FR-treated cotton and cotton blends, tested and documented against both welding classes, so the fabric you buy is already backed by the test report a tender or safety officer will ask for.

Welding & metal processing
Primary hazardsMetal splash · radiant heat · flame
Key standardEN ISO 11611
Area of useWelders clothing
Typical fibresFR cotton & cotton blends

Why welders need EN ISO 11611 certified fabric

Welding, brazing, plasma cutting and gouging all throw off molten metal droplets and expose the wearer to radiant heat from the arc. EN ISO 11611 is the standard written specifically for this hazard set, and it is split into two classes: Class 1 for less hazardous welding techniques and lower spatter/metal-splash risk, and Class 2 for more hazardous techniques such as MMA, MAG and MIG welding where higher levels of spatter and radiant heat are expected. Fabric weight and construction (typically a tightly-woven FR cotton twill or satin) are what push a garment from Class 1 into Class 2 — XM FireLine fabrics are tested and documented against both.

The standard that applies

Welders are almost always specified against EN ISO 11611. Two standards are commonly requested alongside it.

EN ISO 11611
EN ISO 11611

Clothing to protect against welding hazards — metal splash, radiant heat, brief flame contact. The primary standard for welders.

View standard
EN 1149
EN 1149-5

Electrostatic dissipation — specified alongside EN ISO 11611 whenever welding takes place near flammable or explosive atmospheres.

View standard
EN ISO 20471
EN ISO 20471

High-visibility signalling — relevant when welding is combined with site or roadside work requiring visibility class.

View standard

Recommended fabrics for welding & metal processing

Five FR cotton fabrics currently carrying the Welders clothing area-of-use tag.

Sourcing for a welding tender

If your tender specifies Class 1 or Class 2, send us the exact wording and end-use. We’ll confirm which XM FireLine fabric meets it and provide the ISO 6942, ISO 9150, ISO 15025 and EN 1149-2 test reports along with the quote.

Scroll to Top