Home › Industries We Serve › Industrial Laundry & Workwear Rental

XM Textiles supplies workwear fabrics, reflective tapes and trims tested after up to 100 industrial wash cycles at 75 °C to ISO 15797. A rental garment keeps its protection, shade and fit for its full service life, and every claim is backed by a published certificate.

Wash standardISO 15797 industrial washing, 75 °C
Verified up to100 cycles FR fabrics & FR tape · 50 cycles uniform fabrics & FR hook-and-loop
Checked after washingFlame spread (ISO 15025), retro-reflection, shrinkage, shade
SupplyStock in 3 EU warehouses: Romania, Poland, Portugal
100WASHES × 75 °C

After 100 industrial washes to ISO 15797, seven XM FireLine fabrics still passed the ISO 15025 flame-spread test (Procedures A and B) with no flaming to the edge, no afterflame and no afterglow. That meets the limited flame spread requirement of EN ISO 11612, verified at the end of a long rental life, not after the first wash.

What an industrial wash does to a garment, and how XM covers it

Protection fades

“Is it still FR after wash 60?”

FR, hi-vis and antistatic properties are certified after a stated number of washes, at a stated temperature. XM prints both on every certificate, for example 50 × 75 °C or 100 × 75 °C.

The garment pool drifts

“New jackets don’t match the old ones.”

Rental pools mix garments of different ages. XM fixes shade and construction per article, so a reorder matches the pool. VAT-dyed Topper-210 shrinks under 1% after industrial washing at 75 °C.

Trims fail first

“The fabric is fine, the tape peeled.”

A garment is retired when its weakest part fails. XM tests reflective tapes and FR hook-and-loop through the same 75 °C wash, so fabric and trims are specified together.

One wash scale for the whole garment

Certified wash cycles at 75 °C, per component. Choose a kit where every part lasts as long as the contract.

XM FireLineXM TextilesXM SilverLineXM Accessories

Industrial Laundry-proven articles

Flame-retardant fabrics

XM FireLine
ArticleCompositionWeight · weaveAfter industrial wash
Etna99% cotton, 1% AS350 g/m² · satin 4/1100 × 75 °C ISO 15797
Fiji99% cotton, 1% AS220 g/m² · twill 2/1100 × 75 °C ISO 15797
Gefest-480100% cotton480 g/m² · satin 5/2100 × 75 °C ISO 15797
Madeira-320100% cotton320 g/m² · twill 3/1100 × 75 °C ISO 15797
Poseidon-24580% cotton, 19% PES, 1% AS245 g/m² · twill 2/2100 × 75 °C ISO 15797
Poseidon-30080% cotton, 19% PES, 1% AS300 g/m² · twill 2/2100 × 75 °C ISO 15797
Volcano87% cotton, 12% PA, 1% AS260 g/m² · satin 4/1100 × 75 °C ISO 15797

Tested for flame spread to ISO 15025 after 100 washes. Full EN ISO 11612 / 11611 / IEC 61482 certificates are issued at 50 × 75 °C. Read the test summary

Uniform & corporate-wear fabrics

XM Textiles
ArticleCompositionWeight · weaveLaundry data
Topper-21065% PES, 35% cotton210 g/m² · twill 2/1<1% shrinkage at 75 °C · VAT-dyed
Topper-24565% PES, 35% cotton245 g/m² · twill 2/150+ industrial washes
Topper-245 Stretch65% PES, 32% cotton, 3% EOL245 g/m² · twill 2/150 × 75 °C ISO 15797 · GRS

Reflective tapes

XM SilverLine
ArticleTypeStandardsAfter industrial wash
XM-8011C ProFR heat-transfer, segmentedEN 469 · EN 20471100 × 75 °C
XM-6005B ProSew-on, 100% PESEN 2047160 × 75 °C
XM-6007C ProHeat-transfer, segmentedEN 2047150 × 75 °C · 100 × 60 °C
XM-6005B TC 500 IndustrialSew-on, 65/35 PES/cottonEN 2047150 washes

Trims

XM Accessories
ArticleTypeStandardsAfter industrial wash
XM-HLFRFR hook-and-loopEN 469 · EN ISO 11612 · 11611 · 1411650 × 75 °C (test report)

How to specify fabrics for a laundry programme

Share the wash process

Temperature, chemistry, tunnel washer or washer-extractor, tunnel finisher or tumble dryer, target number of cycles.

Match the kit

We pair fabric, tape and trims rated for the same cycles and temperature, across all four XM lines.

Test with free samples

Samples, TDS and certificates for your own trial washes before the garment goes into production.

Reorder the same article

Stock in Romania, Poland and Portugal. Same shade and construction for every replacement order.

Industrial laundry FAQ

What is ISO 15797?

ISO 15797 sets the industrial washing and finishing procedures used to test workwear: wash programmes up to 75 °C with professional detergents, followed by tunnel finishing or tumble drying. It simulates rental-laundry conditions. EN ISO 6330 is the domestic washing procedure and is milder.

Do XM FR fabrics stay flame-retardant after industrial washing?

Yes. Etna, Fiji, Gefest-480, Madeira-320, Poseidon-245, Poseidon-300 and Volcano were washed 100 times at 75 °C to ISO 15797 and then passed the ISO 15025 flame-spread test with no flaming to the edge, no afterflame and no afterglow.

Which reflective tapes last through industrial laundry?

XM-8011C Pro is certified to EN 469 and EN 20471 after 100 washes at 75 °C. XM-6005B Pro (60 × 75 °C) and XM-6007C Pro (50 × 75 °C, 100 × 60 °C) cover EN 20471 hi-vis garments.

Can a garment maker use XM certificates for CE marking?

XM certificates cover the fabric or tape. The finished garment is CE marked under Regulation (EU) 2016/425, which also assesses design, seams and labelling. The fabric certificate lets the garment maker go through type examination without re-testing the material.

How do I get samples for a rental programme?

Send your wash process and target cycle count through the contact form. We send free samples with the matching TDS and certificates.

Planning a rental or laundry programme?

One supplier for fabric, reflective tape and trims, all rated for the same wash.

Ask a specialist
Other industries
Scroll to Top