Flame Retardant Hook & Loop Tape (Velcro-type)
XM-HLFR is a 100% nylon flame retardant hook and loop fastening tape (Velcro-type) for cuffs, plackets and pocket flaps on FR workwear and protective clothing. Black, 25 and 50 mm wide, supplied in full 25 m rolls. Tested by Aitex (Spain), test report 2025EP5493, after 50 industrial washes at 75 °C to EN 469, EN ISO 11611, EN ISO 11612 and EN ISO 14116.
Technical data
| Test | Method | Result |
|---|---|---|
| Industrial washing (pre-treatment) | EN ISO 15797:2018, Table 4, procedure 2; 50 cycles at 75 °C, tumble dried at 70 °C | 50 × 75 °C |
| Limited flame spread | EN ISO 15025:2016, Method A; EN 469:2020, after 50 washes | Pass |
| Limited flame spread | EN ISO 15025:2016, Method A; EN ISO 11611:2015, after 50 washes | A1 |
| Limited flame spread | EN ISO 15025:2016, Method A; EN ISO 11612:2015, after 50 washes | A1 |
| Limited flame spread | EN ISO 15025:2016, Method A; EN ISO 14116:2015, after 50 washes | Index 3 |
Values are indicative and may vary slightly between batches. Tested on 25 mm tape.
Frequently asked questions
What is the minimum order?
One full 25 m roll. The tape is not sold by the metre.
Which widths and colours are available?
Widths: 25 and 50 mm. Colour: black.
Is it flame retardant?
Yes. This 100% nylon tape was tested after 50 industrial washes at 75 °C for limited flame spread (EN ISO 15025, EN 469:2020) and to EN ISO 11611 (A1), EN ISO 11612 (A1) and EN ISO 14116 (Index 3).
Where is it used?
As a closure on FR workwear and protective clothing: cuffs, plackets, pockets and flaps.
