EN 61482
-
New
Select options
275gsm | 75% Cotton, 24% Polyester, 1% AS | Twill 2/2
(10 Certificates)
Flame Retardant fabric
A specialized fabric designed for multi-protective clothing. Recommended for the production of clothes for welders and related professions. Used in clothing for the heavy industry, chemical industry, energy industry, including specialist insulated clothing, and for other professions where it is necessary to wear protective clothing against heat and flames, accidental contact with chemicals or discharges. Available in basic colors and yellow fluo.[show_more more="Show more" less="Show less" color="#629e11;" align=”left” ]Clothes made of fabric are characterized by high strength and durability in use. Cotton ensures comfort in all conditions, perfectly absorbs sweat and is breathable. This fabric is resistant to tearing and tearing thanks to the addition of polyester. It provides protection against hot factors and metal splashes even after 25 washing cycles. Thanks to the acid-protective finish, it is resistant to accidental contact with specific chemicals but also with water and dirt. Antistatic properties obtained thanks to the construction with the use of antistatic fibers. A special production process ensures color fastness and dimensional stability after washing at 60˚C. The fabric has a certificate of compliance with the European standard for workwear: EN 13688 and standards for protective clothing: EN 11611: Protective clothing used during welding; EN 11612: Clothing for protection against heat and flame and EN 1149: Protective clothing – Electrostatic properties; EN 13034 type 6 PB: Protective clothing against liquid chemicals. IEC 61482-1-2 Protective clothing against the thermal hazards of an electric arc. The product complies with Oeko-tex® Standard.[/show_more]
Key features: Flame Retardant, Antistatic
Certifications: ISO 11611, ISO 11612, EN 1149, EN 13034, EN 20471 (Contrast Colors), EN 61482, Oeko-tex 100
STORM-275
Select options275gsm | 75% Cotton, 24% Polyester, 1% AS | Twill 2/2
(10 Certificates)
Flame Retardant fabric
A specialized fabric designed for multi-protective clothing. Recommended for the production of clothes for welders and related professions. Used in clothing for the heavy industry, chemical industry, energy industry, including specialist insulated clothing, and for other professions where it is necessary to wear protective clothing against heat and flames, accidental contact with chemicals or discharges. Available in basic colors and yellow fluo.[show_more more="Show more" less="Show less" color="#629e11;" align=”left” ]Clothes made of fabric are characterized by high strength and durability in use. Cotton ensures comfort in all conditions, perfectly absorbs sweat and is breathable. This fabric is resistant to tearing and tearing thanks to the addition of polyester. It provides protection against hot factors and metal splashes even after 25 washing cycles. Thanks to the acid-protective finish, it is resistant to accidental contact with specific chemicals but also with water and dirt. Antistatic properties obtained thanks to the construction with the use of antistatic fibers. A special production process ensures color fastness and dimensional stability after washing at 60˚C. The fabric has a certificate of compliance with the European standard for workwear: EN 13688 and standards for protective clothing: EN 11611: Protective clothing used during welding; EN 11612: Clothing for protection against heat and flame and EN 1149: Protective clothing – Electrostatic properties; EN 13034 type 6 PB: Protective clothing against liquid chemicals. IEC 61482-1-2 Protective clothing against the thermal hazards of an electric arc. The product complies with Oeko-tex® Standard.[/show_more]
Key features: Flame Retardant, Antistatic
Certifications: ISO 11611, ISO 11612, EN 1149, EN 13034, EN 20471 (Contrast Colors), EN 61482, Oeko-tex 100
-
Select options
260 g/m2 | 87 % Bavlna, 12 % Nylon, 1 % AS | Satén 4/1
(6 Certifikáty)
Nehořlavá tkanina
Volcano je multifunkční nehořlavá tkanina vyrobená ze směsi bavlny a nylonu. Tkanina obsahuje také antistatickou uhlíkovou přízi. Stylová atlasová vazba 4/1. Tkanina Volcano se hojně používá pro FR oděvy pro ropné a plynárenské společnosti.[show_more more="Show more" less="Show less" color="#629e11;" align=”left” ] Volcano je inovativní nehořlavá tkanina vyrobená ze směsi bavlny a nylonu, která je extrémně odolná proti roztržení a trvanlivá. Tato odolnost umožňuje dostatečně prodloužit životnost nehořlavého oblečení. S oděvem Volcano nemusíte obětovat bezpečnost, protože při hmotnosti pouhých 260 g/m2 (7,7 oz) splňuje Volcano požadavky úrovně HRC 2 (definované NFPA 70E) s ATPV 8,2 cal/cm2. V povrchu materiálu Volcano je zapuštěna antistatická uhlíková příze, takže je bezpečný pro použití v prostředí s nebezpečím výbuchu. Aby se zabránilo jiskření při elektrostatickém výboji (ESD), antistatická vlákna bezpečně odvádějí statickou elektřinu, čímž eliminují riziko požáru a výbuchu. Tkanina Volcano FR je rovněž certifikována podle norem EN ISO 11612 a EN ISO 11611 pro ochranné oděvy. Volcano má také dodatečnou úpravu proti více rizikům, která poskytuje dodatečnou ochranu proti kyselinám, olejům, tukům a vodě. Multirizikové vlastnosti jsou potvrzeny certifikátem ISO 13034. Volcano je vynikající volbou FR oděvu pro ropné a plynárenské společnosti pracující v teplém nebo horkém podnebí. Díky elegantní a hladké saténové vazbě vypadají oděvy Volcano bezvadně na šéfech vrtných plošin na moři i na manažerech kanceláří ropných společností.[/show_more]
Klíčové vlastnosti: Nehořlavé, antistatické, průmyslové praní, 100×750C (omezené šíření plamene), 50×750C (EN 11612, EN 1149-3, EN 61482)
Certifikace: ISO 11611, ISO 11612, EN 1149, EN 13034, Oeko-tex 100
VOLCANO
Select options260 g/m2 | 87 % Bavlna, 12 % Nylon, 1 % AS | Satén 4/1
(6 Certifikáty)
Nehořlavá tkanina
Volcano je multifunkční nehořlavá tkanina vyrobená ze směsi bavlny a nylonu. Tkanina obsahuje také antistatickou uhlíkovou přízi. Stylová atlasová vazba 4/1. Tkanina Volcano se hojně používá pro FR oděvy pro ropné a plynárenské společnosti.[show_more more="Show more" less="Show less" color="#629e11;" align=”left” ] Volcano je inovativní nehořlavá tkanina vyrobená ze směsi bavlny a nylonu, která je extrémně odolná proti roztržení a trvanlivá. Tato odolnost umožňuje dostatečně prodloužit životnost nehořlavého oblečení. S oděvem Volcano nemusíte obětovat bezpečnost, protože při hmotnosti pouhých 260 g/m2 (7,7 oz) splňuje Volcano požadavky úrovně HRC 2 (definované NFPA 70E) s ATPV 8,2 cal/cm2. V povrchu materiálu Volcano je zapuštěna antistatická uhlíková příze, takže je bezpečný pro použití v prostředí s nebezpečím výbuchu. Aby se zabránilo jiskření při elektrostatickém výboji (ESD), antistatická vlákna bezpečně odvádějí statickou elektřinu, čímž eliminují riziko požáru a výbuchu. Tkanina Volcano FR je rovněž certifikována podle norem EN ISO 11612 a EN ISO 11611 pro ochranné oděvy. Volcano má také dodatečnou úpravu proti více rizikům, která poskytuje dodatečnou ochranu proti kyselinám, olejům, tukům a vodě. Multirizikové vlastnosti jsou potvrzeny certifikátem ISO 13034. Volcano je vynikající volbou FR oděvu pro ropné a plynárenské společnosti pracující v teplém nebo horkém podnebí. Díky elegantní a hladké saténové vazbě vypadají oděvy Volcano bezvadně na šéfech vrtných plošin na moři i na manažerech kanceláří ropných společností.[/show_more]
Klíčové vlastnosti: Nehořlavé, antistatické, průmyslové praní, 100×750C (omezené šíření plamene), 50×750C (EN 11612, EN 1149-3, EN 61482)
Certifikace: ISO 11611, ISO 11612, EN 1149, EN 13034, Oeko-tex 100
-
Read more
FR Sewing Threads | 100% Meta-Aramid
(0 Certificates)
Flame Retardant – Sewing Threads
XM-60 is a high-tenacity sewing thread spun from 100% meta-aramid staple fiber. The 30S/3 three-ply construction delivers the seam strength, abrasion resistance and dimensional stability required for protective workwear that must survive repeated industrial laundering and high-temperature exposure.[show_more more="Show more" less="Show less" color="#629e11" align="left" ]Meta-aramid’s flame-retardant property comes from the polymer itself, so the thread will not melt or drip and its FR performance is permanent — well-suited to pairing with both inherent FR fabrics and durable FR-treated fabrics across the XM Fireline range. Tested and certified XM-60 30S/3 has been independently tested by AITEX (Spanish Textile Research Institute, ENAC-accredited laboratory) against the sewing thread requirement of EN 61482-2:2020 — the European standard for protective clothing against the thermal hazards of an electric arc.
Test method: EN ISO 3146:2000 Method B (Differential Scanning Calorimetry per EN ISO 11357-3:2018) Pass criterion: No melting at 260 °C ± 5 °C
XM-60 result: No melting observed across the full test range up to 300 °C
Report reference: AITEX 2025EP0638 (issued 28 February 2025)
This certifies XM-60 as suitable for use in structural seams of arc-flash protective clothing built to EN 61482-2:2020, and confirms its thermal stability for use in garments certified to EN ISO 11612 (heat & flame), EN ISO 11611 (welding), EN 469 (firefighter clothing) and NFPA 2112 / NFPA 70E systems. XM-60 also holds OEKO-TEX® Standard 100 certification, verifying it is free from harmful substances and safe for prolonged skin contact.Key performance
Does not melt — verified to 300°C in DSC testing Char temperature ≈ 400°C, decomposition above 425°C (typical of meta-aramid) Inherently flame retardant — FR performance is permanent and laundry-stable Compatible with all major FR fabric systems: meta-aramid, para-aramid, FR cotton (inherent and treated), FR cotton/nylon, modacrylic blends and PBITypical applications
Structural seams in:
- arc-flash suits and coveralls for utility and electrical workers
- firefighter station- and structural-wear
- oil, gas and petrochemical FR coveralls
- welder’s clothing
- military combat uniforms
- molten-metal aprons and foundry PPE.[/show_more]
Key features: Flame Retardant, Sewing Threads
Certifications:
XM-60 30S/3
Read moreFR Sewing Threads | 100% Meta-Aramid
(0 Certificates)
Flame Retardant – Sewing Threads
XM-60 is a high-tenacity sewing thread spun from 100% meta-aramid staple fiber. The 30S/3 three-ply construction delivers the seam strength, abrasion resistance and dimensional stability required for protective workwear that must survive repeated industrial laundering and high-temperature exposure.[show_more more="Show more" less="Show less" color="#629e11" align="left" ]Meta-aramid’s flame-retardant property comes from the polymer itself, so the thread will not melt or drip and its FR performance is permanent — well-suited to pairing with both inherent FR fabrics and durable FR-treated fabrics across the XM Fireline range. Tested and certified XM-60 30S/3 has been independently tested by AITEX (Spanish Textile Research Institute, ENAC-accredited laboratory) against the sewing thread requirement of EN 61482-2:2020 — the European standard for protective clothing against the thermal hazards of an electric arc.
Test method: EN ISO 3146:2000 Method B (Differential Scanning Calorimetry per EN ISO 11357-3:2018) Pass criterion: No melting at 260 °C ± 5 °C
XM-60 result: No melting observed across the full test range up to 300 °C
Report reference: AITEX 2025EP0638 (issued 28 February 2025)
This certifies XM-60 as suitable for use in structural seams of arc-flash protective clothing built to EN 61482-2:2020, and confirms its thermal stability for use in garments certified to EN ISO 11612 (heat & flame), EN ISO 11611 (welding), EN 469 (firefighter clothing) and NFPA 2112 / NFPA 70E systems. XM-60 also holds OEKO-TEX® Standard 100 certification, verifying it is free from harmful substances and safe for prolonged skin contact.Key performance
Does not melt — verified to 300°C in DSC testing Char temperature ≈ 400°C, decomposition above 425°C (typical of meta-aramid) Inherently flame retardant — FR performance is permanent and laundry-stable Compatible with all major FR fabric systems: meta-aramid, para-aramid, FR cotton (inherent and treated), FR cotton/nylon, modacrylic blends and PBITypical applications
Structural seams in:
- arc-flash suits and coveralls for utility and electrical workers
- firefighter station- and structural-wear
- oil, gas and petrochemical FR coveralls
- welder’s clothing
- military combat uniforms
- molten-metal aprons and foundry PPE.[/show_more]
Key features: Flame Retardant, Sewing Threads
Certifications: