Antiestático
-
180gsm | 93% M-Aramida, 5% P-Aramida, 2% AS | Sarga 2/1 FR
(2 Certificados)
Tejido ignífugo
Artex-180 es un tejido resistente a las llamas de 180 g hecho de fibras de aramida inherentemente no inflamables con 93% de Meta-Aramida, 5% de Para-Aramida, 2% Antiestático en tejido de sarga 2/1. Artex-180 es un innovador tejido inherente resistente a las llamas para ropa protectora y ignífuga.[show_more more="Show more" less="Show less" color="#629e11" align="left" ] Esta tela es la mejor para el uso en los servicios de emergencia (ropa EMS), para el equipo de bomberos, así como para las fuerzas especiales, los uniformes de los marines, trajes de vuelo de los pilotos militares. Artex-180 también es adecuado para baberos ignífugos y monos ignífugos para trabajadores de las industrias de petróleo y gas, química y energía. El tejido Artex-180 proporciona protección contra incendios, llamas abiertas y arcos eléctricos. La protección térmica inherente no se puede eliminar. El tejido es muy duradero y súper resistente a la abrasión.
Entre otras características de Artex-180 se encuentran el peso ligero y la buena transpirabilidad, lo que le da una comodidad adicional al usuario. Debido al hilo antiestático de carbono integrado, Artex evita la acumulación de descarga electrostática (ESD) y elimina la posibilidad de explosión en industrías de petróleo, gas y otras. Artex-180 ha sido certificado en el laboratorio BTTG (Reino Unido) según las normas ISO 11612 y EN 1149-5.[/show_more]Características principales: Retardante de llama, Antiestático, Oeko-Tex 100
Certificaciones: ISO 11612, EN 1149-3
Tejidos ignífugos de aramidaARTEX-180
180gsm | 93% M-Aramida, 5% P-Aramida, 2% AS | Sarga 2/1 FR
(2 Certificados)
Tejido ignífugo
Artex-180 es un tejido resistente a las llamas de 180 g hecho de fibras de aramida inherentemente no inflamables con 93% de Meta-Aramida, 5% de Para-Aramida, 2% Antiestático en tejido de sarga 2/1. Artex-180 es un innovador tejido inherente resistente a las llamas para ropa protectora y ignífuga.[show_more more="Show more" less="Show less" color="#629e11" align="left" ] Esta tela es la mejor para el uso en los servicios de emergencia (ropa EMS), para el equipo de bomberos, así como para las fuerzas especiales, los uniformes de los marines, trajes de vuelo de los pilotos militares. Artex-180 también es adecuado para baberos ignífugos y monos ignífugos para trabajadores de las industrias de petróleo y gas, química y energía. El tejido Artex-180 proporciona protección contra incendios, llamas abiertas y arcos eléctricos. La protección térmica inherente no se puede eliminar. El tejido es muy duradero y súper resistente a la abrasión.
Entre otras características de Artex-180 se encuentran el peso ligero y la buena transpirabilidad, lo que le da una comodidad adicional al usuario. Debido al hilo antiestático de carbono integrado, Artex evita la acumulación de descarga electrostática (ESD) y elimina la posibilidad de explosión en industrías de petróleo, gas y otras. Artex-180 ha sido certificado en el laboratorio BTTG (Reino Unido) según las normas ISO 11612 y EN 1149-5.[/show_more]Características principales: Retardante de llama, Antiestático, Oeko-Tex 100
Certificaciones: ISO 11612, EN 1149-3
-
New
280gsm | 87% Cotton, 12% Nylon, 1% AS | Twill 2/2
(6 Certificates)
Flame Retardant fabric
A specialized fabric designed for multi-protective clothing. Recommended for the production of clothes for welders and related professions. Used in clothing for the heavy industry, chemical industry, energy industry, including specialist insulated clothing, and for other professions where it is necessary to wear protective clothing against heat and flames, accidental contact with chemicals or discharges. Available in basic colors and yellow fluo.[show_more more="Show more" less="Show less" color="#629e11;" align=”left” ]Clothes made of fabric are characterized by high strength and durability in use. Cotton ensures comfort in all conditions, perfectly absorbs sweat and is breathable. This fabric is resistant to tearing and tearing thanks to the addition of polyester. It provides protection against hot factors and metal splashes even after 25 washing cycles. Thanks to the acid-protective finish, it is resistant to accidental contact with specific chemicals but also with water and dirt. Antistatic properties obtained thanks to the construction with the use of antistatic fibers. A special production process ensures color fastness and dimensional stability after washing at 60˚C. The fabric has a certificate of compliance with the European standard for workwear: EN 13688 and standards for protective clothing: EN 11611: Protective clothing used during welding; EN 11612: Clothing for protection against heat and flame and EN 1149: Protective clothing – Electrostatic properties; EN 13034 type 6 PB: Protective clothing against liquid chemicals. IEC 61482-1-2 Protective clothing against the thermal hazards of an electric arc. The product complies with Oeko-tex® Standard.[/show_more]
Key features: Flame Retardant, Antistatic
Certifications: ISO 11611, ISO 11612, EN 1149, EN 13034, EN 20471 (Contrast Colors), EN 61482, Oeko-tex 100
Tejidos ignífugos de algodon/poliésterKEON-280 (MR)
280gsm | 87% Cotton, 12% Nylon, 1% AS | Twill 2/2
(6 Certificates)
Flame Retardant fabric
A specialized fabric designed for multi-protective clothing. Recommended for the production of clothes for welders and related professions. Used in clothing for the heavy industry, chemical industry, energy industry, including specialist insulated clothing, and for other professions where it is necessary to wear protective clothing against heat and flames, accidental contact with chemicals or discharges. Available in basic colors and yellow fluo.[show_more more="Show more" less="Show less" color="#629e11;" align=”left” ]Clothes made of fabric are characterized by high strength and durability in use. Cotton ensures comfort in all conditions, perfectly absorbs sweat and is breathable. This fabric is resistant to tearing and tearing thanks to the addition of polyester. It provides protection against hot factors and metal splashes even after 25 washing cycles. Thanks to the acid-protective finish, it is resistant to accidental contact with specific chemicals but also with water and dirt. Antistatic properties obtained thanks to the construction with the use of antistatic fibers. A special production process ensures color fastness and dimensional stability after washing at 60˚C. The fabric has a certificate of compliance with the European standard for workwear: EN 13688 and standards for protective clothing: EN 11611: Protective clothing used during welding; EN 11612: Clothing for protection against heat and flame and EN 1149: Protective clothing – Electrostatic properties; EN 13034 type 6 PB: Protective clothing against liquid chemicals. IEC 61482-1-2 Protective clothing against the thermal hazards of an electric arc. The product complies with Oeko-tex® Standard.[/show_more]
Key features: Flame Retardant, Antistatic
Certifications: ISO 11611, ISO 11612, EN 1149, EN 13034, EN 20471 (Contrast Colors), EN 61482, Oeko-tex 100
-
New
275gsm | 75% Cotton, 24% Polyester, 1% AS | Twill 2/2
(10 Certificates)
Flame Retardant fabric
A specialized fabric designed for multi-protective clothing. Recommended for the production of clothes for welders and related professions. Used in clothing for the heavy industry, chemical industry, energy industry, including specialist insulated clothing, and for other professions where it is necessary to wear protective clothing against heat and flames, accidental contact with chemicals or discharges. Available in basic colors and yellow fluo.[show_more more="Show more" less="Show less" color="#629e11;" align=”left” ]Clothes made of fabric are characterized by high strength and durability in use. Cotton ensures comfort in all conditions, perfectly absorbs sweat and is breathable. This fabric is resistant to tearing and tearing thanks to the addition of polyester. It provides protection against hot factors and metal splashes even after 25 washing cycles. Thanks to the acid-protective finish, it is resistant to accidental contact with specific chemicals but also with water and dirt. Antistatic properties obtained thanks to the construction with the use of antistatic fibers. A special production process ensures color fastness and dimensional stability after washing at 60˚C. The fabric has a certificate of compliance with the European standard for workwear: EN 13688 and standards for protective clothing: EN 11611: Protective clothing used during welding; EN 11612: Clothing for protection against heat and flame and EN 1149: Protective clothing – Electrostatic properties; EN 13034 type 6 PB: Protective clothing against liquid chemicals. IEC 61482-1-2 Protective clothing against the thermal hazards of an electric arc. The product complies with Oeko-tex® Standard.[/show_more]
Key features: Flame Retardant, Antistatic
Certifications: ISO 11611, ISO 11612, EN 1149, EN 13034, EN 20471 (Contrast Colors), EN 61482, Oeko-tex 100
Tejidos ignífugos de algodon/poliésterSTORM-275
275gsm | 75% Cotton, 24% Polyester, 1% AS | Twill 2/2
(10 Certificates)
Flame Retardant fabric
A specialized fabric designed for multi-protective clothing. Recommended for the production of clothes for welders and related professions. Used in clothing for the heavy industry, chemical industry, energy industry, including specialist insulated clothing, and for other professions where it is necessary to wear protective clothing against heat and flames, accidental contact with chemicals or discharges. Available in basic colors and yellow fluo.[show_more more="Show more" less="Show less" color="#629e11;" align=”left” ]Clothes made of fabric are characterized by high strength and durability in use. Cotton ensures comfort in all conditions, perfectly absorbs sweat and is breathable. This fabric is resistant to tearing and tearing thanks to the addition of polyester. It provides protection against hot factors and metal splashes even after 25 washing cycles. Thanks to the acid-protective finish, it is resistant to accidental contact with specific chemicals but also with water and dirt. Antistatic properties obtained thanks to the construction with the use of antistatic fibers. A special production process ensures color fastness and dimensional stability after washing at 60˚C. The fabric has a certificate of compliance with the European standard for workwear: EN 13688 and standards for protective clothing: EN 11611: Protective clothing used during welding; EN 11612: Clothing for protection against heat and flame and EN 1149: Protective clothing – Electrostatic properties; EN 13034 type 6 PB: Protective clothing against liquid chemicals. IEC 61482-1-2 Protective clothing against the thermal hazards of an electric arc. The product complies with Oeko-tex® Standard.[/show_more]
Key features: Flame Retardant, Antistatic
Certifications: ISO 11611, ISO 11612, EN 1149, EN 13034, EN 20471 (Contrast Colors), EN 61482, Oeko-tex 100